Skip to content
humanoidrobot.build

Every way to get it

Get Pupper v3

Stanford Student Robotics / Hands-On Robotics · open hardware

Buy it from the maker, source the parts yourself, print or outsource the printed parts, or hire someone who has built one. Same numbers, side by side, then a helper that picks one for your budget, tools, time and experience.

L1CompiledBuild package →Printables →
Maker sale
Not sold by the maker
Parts, best region
$2,043+ US
Printer time
—
Fully buildable
not yet
Fig 1/4RenderPupper v3 studio render, three-quarter front view
Studio render of the published MJCF, keyframe pose from the model. Geometry only; colours are the model's own materials.© Rendered by Hyperspawn from G-Levine/pupper_v3_description (MIT) · Hyperspawn render · source
Ship parts to
01

Side by side

Figures from the package · US prices
A

Buy from the maker

Not offered
What you getNot sold by the maker. The registry lists no maker sale for this robot.
Cost—
Time—
Tools—
Skill—
Unknowns—
No store link
B

Source the parts

27/33 priced
What you getA cart of 33 BOM lines (413 parts) across vendors, maker's store first.
Cost$2,043+6 lines unpriced. 4 lines have no offer for US. 1 ship from a global vendor.
  • IN$2,043 · 32 n/a
  • US$2,043 · 4 n/a
  • EU$2,043 · 29 n/a
  • CN$2,043 · 29 n/a
Vendor price where stated, else the package list price. n/a = lines with no vendor there.
TimeAssembly time not stated21 steps without a time
ToolsST-Link V2 · JST SH kit to make a 7-pin cable · STM32CubeProgrammer · 3/4-pin JST SH cable · CP2102 USB-UART adapter (must be CP2102) · +11 more
SkillSoldering, crimping. 21 steps4 safety-critical
Unknowns
  • 6 line prices
  • 4 vendors for US
  • Shipping, duties, taxes
Open the cart
C

Print it, or have it printed

29 printed
What you get29 printed parts and 1 LASER parts for a machining or cutting service.
Cost—No grams in the package, so no filament cost. Print services quote from the files.
TimePrint time not stated.
ToolsFDM printerMinimum bed not stated
SkillPETG, TPU, Steel
Unknowns
  • 29 parts with no grams or hours
  • Print-service prices
  • Largest part size
Printables list
D

Hire a builder

Certified at L5
What you getSomeone who has built this robot assembles it for you, or with you.
CostQuoteParts plus labour. No builder rates are published yet.
TimeSet with the builder.
ToolsNone
SkillNone
Unknowns
  • No certified teams yet: certification needs L5, Pupper v3 is L1.
  • Availability near you
Crew on humanoidrobots.team
02

Which way is yours

Rules, not a model · every reason is shown
Tools you have
Time
Experience
Recommended pathquote

Hire a builder

  • ✓No tools, no skill needed.
  • !No certified teams yet (needs L5; Pupper v3 is L1).
Go
  1. 02Source parts, use a print serviceNeeds soldering or crimping; you have no soldering iron ticked.$2,043 + print quote
  2. 03Source parts, print at homeNeeds an FDM printer; you have none ticked.$2,043+
03

Build readiness

What makes a robot fully buildable
  • ■Open hardware (CAD + BOM public)yes
  • ■Build package compiledyes
  • □BOM lines with a vendor32/33
  • ■Fabrication list19 entries
  • ■Assembly steps, each with a check21/21
  • ■Firmware describedyes

Each unchecked line is a bounty on humanoidrobots.team.

04

Honest unknowns

What this page cannot tell you
  • 6 of 33 BOM lines carry no price.
  • Lines with no vendor, by region: IN 32, US 4, EU 29, CN 29.
  • 29 printed parts have neither grams nor print time.
  • 21 assembly steps have no time estimate.
  • Resale and used units: not tracked.
  • Shipping, duties and taxes: not included anywhere on this page.