Skip to content
humanoidrobot.build

Every way to get it

Get Unitree H1-2

Unitree Robotics · closed hardware

Unitree H1-2 cannot be built from public files. Here is how to buy it, and the open robots nearest in size that you can build.

L1CompiledRobot sheet →
Maker sale
Buy assembled
Parts, best region
—
Printer time
—
Fully buildable
closed
Fig 1/3RenderUnitree H1-2 studio render, three-quarter front view
Studio render of the published MJCF, the model's zero pose. Geometry only; colours are the model's own materials.© Rendered by Hyperspawn from unitreerobotics/unitree_mujoco (BSD-3-Clause) · Hyperspawn render · source
01

Closed hardware: the real options

No CAD or BOM is public, so there is no cart or print list
A

Buy assembled

What you getThe robot, from the maker or its resellers.
Cost—No price listed on unitree.com. Arm payload is rated 7 kg, peak 21 kg; speed listed as <2 m/s.
TimeMaker's delivery terms.
ToolsNone
SkillNone
Unknowns
  • Used units: the registry does not track resale listings.
unitree.com
B

Build an open robot like it

4 nearest
What you getAn open robot of similar size that you can source, print and assemble.
Cost
TimeDepends on the robot; see its page.
ToolsPer robot
SkillPer robot
UnknownsMatched on height and mass only, never capability. Basis: 180 cm · 45 kg.
Get Dropbear
C

Run it in simulation

Sim model public
What you getIts URDF or MJCF is public: load it in the browser and train policies.
Cost$0In the browser tab.
TimeSeconds to load.
ToolsA browser
SkillNone
Unknowns—
humanoidrobots.training
02

Honest unknowns

What this page cannot tell you
  • Resale and used units: not tracked.
  • Shipping, duties and taxes: not included anywhere on this page.