Printables · package 0.1.0
Print JPL Open Source Rover
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 0
- Entries
- 7
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- Laser · 9
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- Acrylic9 parts
Printer time: not stated.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Bottom plate (bottom_plate.dxf; PCB standoff holes)laser.bottom-plate | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 1 | — | — | folder · github.com |
| Side plate (side_plate.dxf; one file, cut two)laser.side-plate | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 2 | — | — | folder · github.com |
| Gap slat (gap_slat.dxf; one file, cut two)laser.gap-slat | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 2 | — | — | folder · github.com |
| Top front plate (top_front.dxf; optional mission-patch engraving PDFs)laser.top-front | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 1 | — | — | folder · github.com |
| Top rear plate (top_rear.dxf)laser.top-rear | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 1 | — | — | folder · github.com |
| Front plate (front_plate_standoff.dxf)laser.front-plate | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 1 | — | — | folder · github.com |
| Back plate (back_plate_standoff.dxf; switch hole and power-meter cut-out)laser.back-plate | Laser~3 mm (1/8 in) acrylic, MDF or hardwood | 1 | — | — | folder · github.com |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Not printable: 9 Laser parts go to a machining or cutting service.
Upstream files
File links are per part in the table above.
Hardware licence: Apache-2.0