Printables · package 0.1.0
Print Z-Bot (Zeroth Bot)
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 22
- Entries
- 14
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 22
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- Unspecified22 parts
Printer time: not stated. 22 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Hand (left + right)printed.hand | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Elbow bracket (left + right)printed.elbow-bracket | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Shoulder yaw (left + right)printed.shoulder-yaw | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Head (head back plate / head case)printed.head | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Neck (neck back plate / neck adaptor)printed.neck | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Mounting back plate (backpack)printed.mounting-back-plate | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Torsoprinted.torso | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Electronics mountprinted.electronics-mount | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Hip pitch dual carryprinted.hip-pitch-dual-carry | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 1 | — | — | source · github.com |
| Hip yaw (left + right)printed.hip-yaw | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Hip roll (left + right)printed.hip-roll | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Knee pitch (left + right)printed.knee-pitch | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Ankle pitch (left + right)printed.ankle-pitch | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
| Foot (left + right)printed.foot | FDMunspecified (docs give only a Bambu 0.16 mm, 5-wall, tree-support profile) | 2 | — | — | source · github.com |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: MIT