Printables · package 0.1.0
Print openDog V3
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 92
- Entries
- 12
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 92
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PLA92 parts
Printer time: not stated. 92 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Cycloidal disk 1 ('Planetary disk1'), tolerancedprinted.planetary-disk1 | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Cycloidal disk 2 ('Planetary disk2'), tolerancedprinted.planetary-disk2 | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Camprinted.cam | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Cam capprinted.cam-cap | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Top capprinted.top-cap | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Bottom capprinted.bottom-cap | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| Upper mountprinted.upper-mount | FDMPLA | 12 | — | — | STEP · github.comprofile: PLA, 4 perimeters, 30-40% infill (cycloidal driv |
| All other printed parts (drive cases, legs, knee pulleys and idlers, body ends, electronics lid, stand): extract the bodies from 'openDog V3.stp' (inside 'openDog V3.zip'); no per-part list or STL set is publishedprinted.structure | FDMPLA | 1 | — | — | folder · github.comprofile: PLA, 0.3 mm layers, 3 perimeters, ~15% infill (l |
| Foot mould set (mouldA, mouldB, 2 sides, brace) for casting silicone feetprinted.foot-mould | FDMPLA | 1 | — | — | STEP · github.comprofile: PLA, 0.3 mm layers, 3 perimeters, ~15% infill (l |
| Foot insert (cast into each silicone foot)printed.foot-insert | FDMPLA | 4 | — | — | STEP · github.comprofile: PLA, 0.3 mm layers, 3 perimeters, ~15% infill (l |
| Remote base and lid (Remote.stp)printed.remote-case | FDMPLA | 1 | — | — | STEP · github.comprofile: PLA, 0.3 mm layers, 3 perimeters, ~15% infill (l |
| Knee jig (openDogV3_jig_knee.stp; purpose not documented in the repo)printed.knee-jig | FDMPLA | 1 | — | — | STEP · github.comprofile: PLA, 0.3 mm layers, 3 perimeters, ~15% infill (l |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: MIT