Printables · package 0.1.0
Print Stanford Pupper (v1)
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 13
- Entries
- 11
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 13CNC · 10
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PLA13 parts
- CF composite10 parts
Printer time: not stated. 13 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Body support "Front1" (FrontFront.stl), holds 2 hip bearingsprinted.front-front | FDMPLA or PETG (SLS PA12 if ordering out) | 1 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill (BOM 3D Printed P |
| Body support "Front2" (FrontBack.stl)printed.front-back | FDMPLA or PETG (SLS PA12 if ordering out) | 1 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Body support "Back1" (BackFront.stl), holds 2 hip bearingsprinted.back-front | FDMPLA or PETG (SLS PA12 if ordering out) | 1 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Body support "Back2" (BackBack.stl)printed.back-back | FDMPLA or PETG (SLS PA12 if ordering out) | 1 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Raspberry Pi case (picase.stl)printed.picase | FDMPLA or PETG (SLS PA12 if ordering out) | 1 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Inner hip (HipInsideFDM.stl); upstream suggests a 5th as a spareprinted.hip-inside | FDMPLA or PETG (SLS PA12 if ordering out) | 4 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Outer hip (HipOutsideFDM.stl); upstream suggests a 5th as a spareprinted.hip-outside | FDMPLA or PETG (SLS PA12 if ordering out) | 4 | — | — | source · drive.google.comprofile: 0.2-0.4 mm layers, >50% infill |
| Carbon fiber plate "Top"cf.plate-top | CNCCarbon fiber sheet 1.5 mm | 1 | — | — | source · docs.google.comprofile: CNC routed; see the BOM Carbon Fiber Routed Part |
| Carbon fiber plate "Bottom"cf.plate-bottom | CNCCarbon fiber sheet 1.5 mm | 1 | — | — | source · docs.google.comprofile: CNC routed |
| Carbon fiber upper legcf.upper-leg | CNCCarbon fiber sheet 3 mm | 4 | — | — | source · docs.google.comprofile: CNC routed |
| Carbon fiber lower legcf.lower-leg | CNCCarbon fiber sheet 2 mm | 4 | — | — | source · docs.google.comprofile: CNC routed |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Not printable: 10 CNC parts go to a machining or cutting service.
Upstream files
File links are per part in the table above.